MDS Co.

CSA Articulator Instruction
1. Mounting - 

• Mount the Model taken from the face bow and the waxMount the model with the record taken from the face bow using bit for zigMount using the zig.Fill the hole of the mounting plate retention screw with plate before mounting.Mounting using mounting zig. Wait until the gypsum becomes hardened while the upper jaw was mounted. Put the bite was between the correspondent and fix with silicon.Hold the artuculator upside down and mount the lower jaw without the gypsum running downCheck it is mounted completely. Use screw to take the model from the plate. screw clockwise until the model is taken from the plate. Use ranch to take the extra gypsum turn the ranch anti-clockwise and unscrew the magnetic screw to take the extra gypsum. Plate and screwIt is convenient to work on this 30 degrees titled stand and the correspondent teeth located at the forward view and there is no error by optical illusionThe rear part of articulator was widened to make the work easier at the lingual par of the teeth model. it is excellent for array task to check the lingual part. 

Accessory Part:

• Mounting Zig2.Mounting Mold3.Incisal Table 10 degree4.Incisal Table 20 degree5.Mounting Plate Re-soldering parts6.Face Bow Hold7.Upper Jaw Support8.O-Ring

Additional Information:

• Item Code: AddlerCSA600

Triple assurance for pricise bending of consumable in multiple sizes riton wire bending machine supports various specipcations of orthodontic stainless steel wire ranging from 0.5mm to 1.2mm ensuring easy and convenient swtiching between different consumable sizes.